Refine
Year of publication
- 2023 (12) (remove)
Document type
Language
- English (12)
Is part of the Bibliography
- Yes (12)
Keywords
- Poster (5)
- Active implant (1)
- Balloon catheter (1)
- Biomechanics (1)
- Charge measurement (1)
- Contact simulation (1)
- Cooperative actuators (1)
- Dielectric constant (1)
- Electromagnetic waves (1)
- Electrostatic actuator (1)
- Electrostatic motor (1)
- Encapsulation (1)
- FEA (1)
- Finite element analysis (1)
- Finite element model (1)
- High compliant balloon (1)
- Inchworm motor (1)
- Linear stack actuator (1)
- Metamaterial (1)
- Metasurface (1)
- Metasurfaces (1)
- Microsystems (1)
- Miniaturization (1)
- Parylene C (1)
- Piezoelectric actuator (1)
- Piezoelectricity (1)
- Reverse identification (1)
- Self-sensing (1)
- Split ring resonator (1)
- Strain sensor (1)
- Stretchability (1)
- Tactile sensing (1)
- Terahertz device (1)
- Terahertz devices (1)
- Vessel analysis (1)
The charge response of a force applied to piezoelectric stack actuators was characterized in the range of 0 N – 20 N for application in piezoelectric self-sensing. Results show linear behavior between ap-plied force and collected charge for both actuators tested in this study. One actuator exhibits a 3.55 times higher sensitivity slope than the other related to its larger capacitance. An error analysis reveals a reduction of relative error in charge measurement with rising forces applied to the actuators.
Feasibility of Parylene C for encapsulating piezoelectric actuators in active medical implants
(2023)
Parylene C is well-known as an encapsulation material for medical implants. Within the approach of miniaturization and automatization of a bone distractor, piezoelectric actuators were encapsulated with Parylene C. The stretchability of the polymer was investigated with respect to the encapsulation functionality of piezoelectric chips. We determined a linear yield strain of 1% of approximately 12-μm-thick Parylene C foil. Parylene C encapsulation withstands the mechanical stress of a minimum of 5×105 duty cycles by continuous actuation. The experiments demonstrate that elongation of the encapsulation on piezoelectric actuators and thus the elongation of Parylene C up to 0.8 mm are feasible.